XXG-1605 Industrial X Ray Machine Air Clooing with 160KV 5mA
|Output voltage||50-160 KV|
|Focus size||1.2×1.2 mm|
|Generator size||220×220×560 mm|
|Controller size||380×380×190 mm|
|Controller weight||12 kg|
|Input power||AC 185-245V @50~60Hz|
1. It can still work by applying special design what can avoid the
interference by power grid change.
2. We are using highpower electronic components,such as capacitance
and power module with wide capability to greatly ensure the quality
of the products.
3. Apply the isolation technology of low voltage and high voltage
to ensure the controller working stablely.
4. Posses the reliable “time-delayed” function, suitable to operate
in the open field.
Adopting micro-computer control and modular structure,with strong
anti-interference ability and high automaticity and reliable
Parameter setting,working process and trouble indication will be
indicated on the LED lamp.
Independent ageing key is designed for age the machine
Radiating time to cooling time is 1:1.
The controller can notice the type of x-ray generator
The water and dust proof color panel and digital sound keyboard are
introduced that exposure parameters are promptly and accurately
Ensure safety useing the instrument,it is installed with
overtemperature protection device.
Adopting the wider range of kv value, and solve the difficulty
problem of short radiographic range.
Exposure delay function——the delay time can be set less than 10
minutes to keep the operator safe from working place.
Match with various generator and function reliably.
With the outlet of ray warning lamp and wire connecting terminal of
door-machine interlock.(Door-machine interlock——when the lead door
open ,the instrument cut off the high voltage automatically to
protect the operator)
Composition and Application
x ray flaw detector consists of three parts,controller, generator
and connection cable .
X Ray flaw detector plays important parts in carrying on
nondestructive examination for nonmetallic, light metal, casting,
various alloys and pressure vessels etc, mainly detecting weld
defects ,such as crack, blowhole, entrapped slag, incomplete fusion
,blowhole,bubble etc ,also using for shipbuilding ,airplane and
national defense etc industry fiel.
Matters needing attention
(1) The internal X ray generator seal gas insulated above 0.45Mpa,
if placed bolt firmware and the shell, then the local gas
concentration and risk of breakage flying pressure, and the system
can not work, please don't loosen fastening bolts, and don't put
the generator in high temperature applications.
(2) After power on, the controller has a high internal AC and DC
voltage, the use of the case is not allowed to open the case, non
maintenance personnel do not repair.
(3) When not in use, the equipment should be placed in a dry and
ventilated place, the temperature is suitable for a long time did
not use the equipment, when enabled to see if wet and other
phenomena, if there is to be treated before use.