XXG-3005 Industrial X ray Machine with Portable directional 300KV
industry x ray machine directional portable x-ray ndt flaw consists
of three parts,controller, generator and connection cable . mainly
used for testing internal defect of steel, such as entrapped slag,
blowhole,bubble etc and welding seam inspection of boiler,shipbuilding,airplane and national defense etc
industry field,It also benefits to operate outdoor , because of simply operation, being convenient to
|Output voltage||170-300 KV|
|Focus size||2.5×2.5 mm|
|Controller size||380×380×190 mm|
|Controller weight||12 kg|
|Input power||AC 185-245V @50~60Hz|
1. It can still work by applying special design what can avoid the
interference by power grid change.
2. We are using highpower electronic components,such as capacitance
and power module with wide capability to greatly ensure the quality
of the products.
3. Apply the isolation technology of low voltage and high voltage
to ensure the controller working stablely.
4. Posses the reliable “time-delayed” function, suitable to operate
in the open field.
5. It has functions of troubleshooting automatically and pressure
indication to guarantee the stability of working.
Parameter setting,working process and trouble indication will be
indicated on the LED lamp.
Independent ageing key is designed for age the machine
Radiating time to cooling time is 1:1.
The water and dust proof color panel and digital sound keyboard are
introduced that exposure parameters are promptly and accurately
Ensure safety useing the instrument,it is installed with
overtemperature protection device.
Adopting the wider range of kv value, and solve the difficulty
problem of short radiographic range.
Exposure delay function——the delay time can be set less than 10
minutes to keep the operator safe from working place.
Match with various generator and function reliably.
With the outlet of ray warning lamp and wire connecting terminal of
door-machine interlock.(Door-machine interlock——when the lead door
open ,the instrument cut off the high voltage automatically to
protect the operator)
Composition and Application
x ray flaw detector consists of three parts,controller, generator
and connection cable .
X Ray flaw detector plays important parts in carrying on
nondestructive examination for nonmetallic, light metal, casting,
various alloys and pressure vessels etc, mainly detecting weld
defects ,such as crack, blowhole, entrapped slag, incomplete fusion
,blowhole,bubble etc ,also using for shipbuilding ,airplane and
national defense etc industry fiel.
Matters needing attention
(1) The X ray generator in the car, forklift, must stand (fan end
in), while below the mat cushion, if must be sideways when carrying
rings at both ends to pad the damping material to prevent shock.
(2) Using the temperature controller in the -10 to +40 DEG C, rain
prohibited, to avoid danger or damage the instrument to prevent
joint components caused by frost in winter, poor insulation.
(3) Because of the system work, to produce a high voltage pulse
controller, induction to the housing, to connect the ground when
necessary. When erecting generator in welding plate and the
workpiece, the generator with iron and workpiece distance, avoid
the welding current through the generator, the low voltage cable
into the control box will damage to the machine.